Manufacturing anything with silica sand requires complete knowledge regarding its grades. There are around size grades with different purity levels and grain sizes. Industrial experts know their differences very well, but what about the buyers? If you are new to this industry, you will surely struggle with the industrial silica sand selection. You need a supplier like Total Silica LLC, a guideline, and some assistance. Here is all you need.
The largest size of industrial silica grain is 8-16 mesh. If we look at it in millimeters, it is between 2.38 mm and 1.190 mm. It is a heavily coarse-grained material that provides high permeability and a rough surface. When sourcing bulk industrial silica for drainage and filtration, choose this type. Its purity level is near 95%, which makes it rough and larger in size.
This size of industrial silica is common in sports turfs, drainage beds, and coarse filtration beds. Also, it is very handy in foundries. It can withstand extreme heat in furnaces during metal casting. Since it has high permeability, use this type of industrial silica sand for the water filtration process.
Then we move to a slightly smaller size of industrial silica, which is 20-40 mesh. It is from 0.841 mm to 0.400 mm if we look at the size in millimeters. Since it is slightly smaller and less coarse, its purity level has to be higher than the largest ones. That purity level is near 97%, which is why the oil and gas industries choose it the most. Oil and gas choose this grade of bulk industrial silica because it offers high permeability to gas.
The applications of this grade are popular in hydraulic fracturing, mostly. This is why the oil and gas industry heavily relies on it for underground works. Other applications are water filtration, foundries, sandblasting, and abrasives. All these applications need large particles of silica sand for abrasive functions and high permeability in the filtration process.
The medium range of industrial silica comes at 50 - 70 mesh. It is between 0.297 mm and 0.210 mm with a purity level near 98%. This mesh range of silica sand has a slightly smooth surface and a smaller grain size. This range is ideal for the industrial silica sand selection when it comes to the construction industry. Concrete, asphalt, mortar, and similar materials need this medium mesh size.
The applications include glass production, concrete production, and mortar production. These applications need a medium level of silica sand for smoothness and hardness. Therefore, the metal casting process needs bulk industrial silica for high temperature resistance and smooth surface work.
Then the range of fine silica sand starts. Its size is from 0.177 mm to 0.149 mm or 80 – 100 mesh. This fine size makes its particles smooth at a medium level with a purity level near 99%. When choosing bulk industrial silica of fine level, choose 80 – 100 mesh. It is suitable for the production of smooth products like glass, coatings, and ceramics.
Applications
In detail, 80-100 mesh provides smoothness in glass and ceramics production, along with some hardness. Therefore, it is also common in metal casting, paints, and coatings. It provides various advantages to paints and coatings, such as an anti-caking nature. Industrial silica sand selection is common in metal casting because it provides hardness and smoothness together.
When we come to a very fine range of industrial silica sand, its grain size ranges from 0.125 mm to 0.105 mm. Its purity level is near 99.5%, and it has very low permeability and high smoothness. This very fine particle of silica sand provides structural support, extremely low permeability, and smoothness.
Applications
Industries source bulk industrial silica of very fine grade for ceramics production. Also, it is common in high-quality glass and even optical glass production. Even investment casting needs this grade of silica sand for the finest quality of casting.
The last one is the ultra-fine grade of silica sand. It is 150 - 200 mesh, which goes beyond 200 also. In terms of its grain size, it starts from 0.100 mm and goes way beyond for the finest smoothness. Therefore, it is the purest and most expensive grade of industrial silica sand. It is highly smooth and extremely fine with extremely low permeability. That is why its purity level is the highest, which is above 99.8%.
Applications
When it comes to industrial silica sand selection in electronics and high-tech applications, this ultra-fine grade is the best. Industries use it for the production of semiconductors, fiber optics, and solar panels. All three of these are the most advanced industries on which the entire tech world stands. Besides, this grade is common in the production of other superfine glass, ceramics, and rubber.
Selecting the best industrial silica sand for your production needs is not easy. There is a wide range of silica sand grades. This range goes from the coarsest to the ultra-fine one. Over ten industries heavily rely on it, and each industry has different needs and applications from others. Besides, a reliable supplier can offer quality, quantity, grades, and even consultation for the selection of silica sand. Total Silica LLC is a supplier that can guide and supply you with silica sand for your needs.
What is the Mesh Size and Purity of Silica Sand for Semiconductors and Solar Glass?
The mesh size of silica sand for semiconductors and solar glass is 150 – 200 mesh. It is above 0.100 mm for the finest results, and the purity level is above 99.8%. Keep it in mind during the industrial silica sand selection when sourcing in bulk from a supplier like Total Silica LLC.
What is the Mesh Size and Purity of Silica Sand for Concrete and Mortar?
The silica sand’s mesh size is 50 - 70 mesh (0.297 mm – 0.210 mm) for concrete and mortar production. When sourcing bulk industrial silica from a bulk supplier like Total Silica LLC, keep it in mind. It will help you get precise quality for the best results.
What is the Mesh Size and Purity of Industrial Silica for Ceramics, Foundries, and Glass Production?
For ceramics, choose a mesh size between 80 – 200 mesh (0.177 mm and 0.100 mm). For glass production, choose bulk industrial silica 50 – 200 mesh size (0.297 – 0.100 mm). For foundries, choose a mesh size of 8 – 140 mesh (1.190 mm – 0.105 mm). Total Silica LLC can supply all the grades, and you can inquire from this supplier.
How to Find an Industrial Silica Sand Supplier Who Has Competitive Prices?
Total Silica LLC is a good option with industrial silica sand of different grades and low prices. It also offers a global supply.
How to Source Silica Sand for Bulk Production of Glass, Ceramics, and Cement?
You should choose a bulk industrial silica manufacturer like Total Silica LLC. It has competitive prices, multiple grades, and a global supply.
How to Source Silica Sand for the Production of Solar Glass, Fiber Optics, and Semiconductors?
Choose Total Silica LLC to source industrial silica sand for the production of high-end goods. It has a mega supply for solar glass, fiber optics, and semiconductor production.
You source a clean batch of
READ FULLImagine a scenario where you ordered a shipment of silica sand weeks ago. The delivery finally ar
READ FULLManufacturing anything with
READ FULL